Setting up a Home Office Network for the Tech Newbie.

Your are at home now and you don’t have a lot of tech support anymore and your home network may not be up to the challenge for all your online meetings, kids learning at home and perhaps your better half is also working from home too. Your home network may need to be upgraded to accommodate all your needs now. Here is an article to explain how it works so you can set-up your own home network for the tech newbie.

First off you will need to be connected to the internet through your internet service provider (ISP) that requires a modem to connect to the internet. You can can buy or rent the modem from your ISP. Some ISPs’s modems are combined with a router to provide you with wireless and ethernet connection to the internet. But if your don’t have one of these, you will need to get a router to distribute the internet signal to all your devices.

Home Office Network Set-up

This is typically where home networks fails as the router cannot keep up with all the home traffic or the signal does not reach all the rooms in the house. This is the time to get a dual band router that can transmit at higher speeds and extend the signal range. The more antennas the stronger the wireless signal. There are more reasonably priced now as you can get one for $49 at Staples like D-Link Amplifi Dual Band AC750 Wireless Router that has a signal range of 1,000 to 2,000 sq ft.

D-Link Amplifi Dual Band AC750 Wireless Router, High-Gain Antennas

The dual band router can transmit at 2.4 GHz that travels farther at lower speeds and at 5 GHz frequencies that provide faster speeds at shorter range and this speed is needed for video conferencing. A lot of electronic devices and appliances use the 2.4 GHz frequency, including microwaves, baby monitors, and garage door openers.

It is best whenever possible to plug directly into router with an ethernet cable, as a wired connection is always more stable and faster than wireless. To provide you with a better understanding of all the tech terms , here is a glossary of the terms used in a home network.

Ethernet Network: Ethernet is the technology for connecting devices in a wired local area network (LAN) or wide area network (WAN), enabling them to communicate.

Wireless Network: A wireless local area network (WLAN) links two or more devices over a short distance using a wireless distribution method, usually providing a connection through a router for internet access.

Modem: Your modem is a box that connects your home network to the Internet from your service provider. Some modems may include a router that provides wifi and ethernet connections for your home.

Router: A  router connects directly to a modem by a cable. This allows it to receive information from — and transmit information to the internet. The router then creates and communicates with your home Wi-Fi network using built-in antennas or through an ethernet port for wired connections.  Set-up TipD-Link Router Set-up Link

GHz: Short for gigahertz, GHz is a unit of measurement for AC (alternating current) or EM (electromagnetic) wave frequencies equal to 1,000,000,000 (one billion) Hz (hertz). 2. When referring to a computer processor or CPU, GHz is a clock frequency, also known as a clock rate or clock speed, representing a cycle of time.

DHCP: Dynamic Host Configuration Protocol (DHCP) is a network management protocol used to automate the process of configuring devices on IP networks.

IP Address: IP address stands for internet protocol address; it is an identifying number that is associated with a specific computer or computer network. Your router assigns a private IP address to everything on your home network via the DHCP protocol as each computer or device in your home network has a unique private IP address so it can communicate with all the others. You can see what your IP addresses is at this link.

What is difference between WIFI and Bluetooth? Although both are wireless forms of communication, Bluetooth and Wi-Fi differ in terms of their purpose, capabilities, and other factors. Bluetooth allows for short-range data transfer between devices. … Wi-Fi, on the other hand, allows devices to connect to the Internet.

Types of Wires: The are a variety of wired connections used in the creation of a home network that include ethernet for the internet, USB to connect devices and HDMI to connect to TVs. You may want to get different colour wires to help identify them in your network.

Network Switch: A switch is a device in a computer network that connects other devices together by ethernet cable. This is like a multi-plug Y hub connection for the internet signal if you want a wired internet connection for a lot of devices (4 or more).